Your next project—and the markers you intend to use with it—should be the starting point when deciding between the Ezo Spray Mini and Pro. This guide sets the published product information side by side and provides buying guidance.
Quick choice
Consider Mini for a lower-cost introduction to marker spraying, stencils, and simple craft or starter model projects. Consider Pro if model work is your priority and you want the adjustable marker holder described on its product page. Neither choice removes the need to check marker fit.
Mini vs Pro at a glance
| What to compare | Ezo Spray Mini | Ezo Spray Pro |
|---|---|---|
| Listed entry price | $39.99 | $104.99 |
| Marker guidance | Plamojet dual-tip alcohol markers with chisel tips recommended | Compatible alcohol-based ink markers; adjustable holder |
| Charging | USB-C; approximately 2 hours | USB-C; approximately 3 hours; 5V/1A input |
| Color-bundle options | 12, 24, 36, 60, 120, or 240 colors | 24, 48, or 72 colors |
Prices and bundle selections can change.
Start with the project you actually want to finish
Before you pick a kit, define one small project—whether a stencil pattern, a shaded armor panel, or a color test on a spare part. Then note the colors and the degree of control required. That makes a better shopping brief than starting with the biggest bundle.
For a first Gunpla build, we suggest keeping the scope tight. Work on a practice piece before you commit to a visible armor panel. A pricier tool cannot replace learning how marker, surface, and technique work together.
Check your markers before choosing the system
Don’t assume a marker you already own is compatible merely because it uses alcohol ink. Verify the exact model and how it seats in the holder. Mini’s product page warns against thin round tips, loosely fitting markers, and water-based markers. Pro’s page rules out liquid chrome and mirror chrome paint markers.
If you plan to reuse an existing marker set, contact support with the exact brand and model before ordering, and ask about both physical fit and ink compatibility. For any marker confirmed compatible, test it on scrap material rather than a finished model.
Choose colors around a build, not a number
Our buying suggestion is to start with a short color list tied to your project. A larger assortment is useful only if it includes colors you intend to use. Compare the actual color chart and selected bundle contents rather than assuming that similarly named bundles contain the same markers.
For a first experiment, a smaller commitment may make sense. For a planned series of builds, check the palette across those builds before adding more colors. Keep room in your budget for practice materials and whatever surface preparation your chosen materials require.
Setup and care still matter
Follow the current instructions supplied with your tool and marker. Mini's page advises using the included USB-A to USB-C cable and avoiding fast charging. Pro specifies a standard 5V/1A USB adapter and warns against 9V/12V fast chargers.
Mini's care guidance calls for removing and capping the marker, wiping the nozzle exterior, and keeping liquid out of the body. For your working area and protective equipment, follow the tool and ink safety instructions. Cordless operation should not be taken as permission to ignore spray precautions.
Frequently asked questions
Is Pro automatically the better choice for a beginner?
Our recommendation is to decide by project and marker fit. Spending more only makes sense when the features you are paying for answer a specific need.
Can either system replace every traditional airbrush task?
No. Both product pages describe a marker-powered workflow rather than a full replacement for a traditional airbrush. If you need to spray a particular bottled coating, verify the equipment required for that material separately.
Where should I check the current kits?
Review the Ezo Spray Mini product page and the Ezo Spray Pro product page for current selections. For an exact marker-fit question, contact Plamojet support before choosing your kit.